Table of Contents
Advertisement
Navigation
The navigation section of the Artis front panel includes the LCD display, Previous & Next
buttons, Param / Channel buttons, and the Alpha Wheel.
The Display Contrast knob is easily located, above the Alpha Wheel.
The LCD Display
In Program and Multi Mode, the top line of the display shows the current Mode, MIDI
transposition, Category name (with Program number of that Category) and MIDI channel
(Program Mode only). The middle line in large text shows the current Program or Multi ID
number and name.
In Multi Edit Mode, the top line of the display shows the current mode, page name,
Zone number (except for the Common Page, which is common to all Zones), the current
parameter number and the total number of available parameters.
In Global Mode, the top line of the display shows the current mode and page name.
The bottom line of the display shows the names of the Soft Buttons for the current page.
Previous (–) and Next (+) Value Buttons
Use the Previous and Next buttons to scroll through the list of values for the currently
selected parameter. Pressing both the Previous and Next buttons simultaneously is referred
to as the Value Jump double button press. Depending on the selected parameter, Value Jump
can select the next Category default Program/Multi, jump to commonly used values, and
reset parameters to default values. For more information, see Value Jump on page 3-14.
Param / Channel Buttons
In Program Mode, pressing the Param / Channel Up button will change the MIDI transmit
channel from the current channel to the next one; pressing the Param / Channel Down
button will change the MIDI transmit channel from the current channel to the previous one.
Features of the Artis
Navigation
3-11
Advertisement
Table of Contents
