Table of Contents
Advertisement
Program Mode
The Split Function
There are four parameters (described below) that determine the behavior of the Split. Press
one of the four soft buttons on the bottom left of the display to access each of the Split
parameters.
Prog (Split Program)
Press the PROG soft button to change the Prog (Split Program) parameter. The Prog
parameter determines the Program for the left-hand side of the Split, also known as the
"Split Program". Initially the last used Split Program will be selected, or the default Split
Program (210 Motown Bass) if this is the first time using the Split Function since power-up.
Choose a Split Program using the Category and Program/Multi buttons, the Alpha Wheel,
or the Previous/Next buttons.
Vol (Split Volume)
Press the VOLUME soft button to change the Vol (Split Volume) parameter. This parameter
determines the volumes of the left and right-hand Programs. By default, the Split Volume
is set to 0, which results in both Programs having the same volume. When set to a positive
number, the volume for the right hand Program is decreased. When set to a negative
number, the volume for the left hand Program is decreased. To set the Split Volume, use the
Alpha Wheel, Previous/Next buttons, or enter a number using the numbers printed on the
Program/Multi buttons followed by pressing the Enter button. Split Volume can be set to
any number between -127 and 127. Pressing the Value Jump button pair (Previous & Next)
resets the volume to 0.
6-11
Advertisement
Table of Contents
