Kurzweil Artis User Manual page 121

Controller Controller
Number Destination
32 MIDI Bank
33–63 MIDI 33–63
64 Sustain
65 MIDI 65
66 Sostenuto
67 Soft
68 Legato
69 Freeze
70–79 MIDI 70–79
80 MIDI 80
81 MIDI 81
82 MIDI 82
83 MIDI 83
84 Portamento
85 MIDI 85
86 MIDI 86
87 MIDI 87
88 MIDI 88
89 MIDI 89
90 MIDI 90
91–95 MIDI 91–95
96 Data Inc
97 Data Dec
98 NRegParL
99 NRegParM
100 RegParL
101 RegParM
102–119 MIDI 102–119
120 Sound Off
121 RstCtls
122 Local
123 Notes Off
124 Poly
125 Omni
126 Mono On
127 Mono Off
128 Pitch
129 PitchRev
130 PitchUp
131 PitchDwn
132 Pressure
133 Tempo
MIDI Bank change message
MIDI Controllers 33–63
Default destination for Sustain Pedal
Default destination for Sostenuto Pedal (Sustains notes that are currently
down, but not notes played subsequently.)
Lowers the volume by a preset amount and may soften the timbre as well.
Forces mono playback.
Envelopes freeze at current state.
MIDI Controllers 70–79
Default assignment for Switch 1
Default assignment for Switch 2
Default assignment for Switch 3
Default assignment for Switch 4
Standard MIDI controller for setting Portamento starting note
Default assignment for Switch 5
Default assignment for Switch 6 (KB3 only)
Default assignment for Switch 7 (KB3 only)
Default assignment for Switch 8 (KB3 only)
Default assignment for Switch 9 (KB3 only)
MIDI Controllers 94–95
Equivalent to pressing the Next Value button
Equivalent to pressing the Previous Value button
Non–Registered Parameter Least Significant Byte
Non–Registered Parameter Most Significant Byte
Registered Parameter Least Significant Byte
Registered Parameter Most Significant Byte
MIDI Controllers 102–119
Stops all sound in the corresponding channel.
Resets Controllers to defaults in the corresponding channel.
Sends Note Off Message to all playing notes in the corresponding channel.
Values above 64 and below 64 bend the pitch up and down, respectively.
Values above 64 and below 64 bend the pitch down and up, respectively
Values above 0 bend the pitch up
Values above 0 bend the pitch down
Tempo
Multi Edit Mode
Zone Parameters
Description
8-21