Features of the Artis
Mode Buttons
Mode Buttons
The Mode buttons are located beneath the "Mode" label on the right side of the Artis front
panel.
Program Button
Pressing the Program button enters Program Mode (described in Program Mode on page
5-1 and, in further detail, in Program Mode on page 6-1). In Program Mode, you can
select and play different sounds (or "Programs"). This button's LED is illuminated when you
are in Program Mode. Program Mode is the default Mode — the Artis always boots up in
this Mode.
Multi Button
Pressing the Multi button enters Multi Mode (described in Multi Mode on page 5-2 and,
in further detail, in Multi Mode on page 7-1). In Multi Mode, you can select different
configurations of Programs, controller assignments, and MIDI channel assignments.
This button's LED is illuminated when you are in Multi Mode.
Global Button
Pressing the Global button enters Global Mode (described in Global Mode on page
5-2 and, in further detail, in Global Mode on page 9-1). In Global Mode, you can edit
parameters that control the overall behavior of the Artis. These parameters include tuning,
transposition and velocity. Additionally, you can save or load user Programs and Multis to
and from a computer connected to the Artis via USB as well as perform a Hard/Soft Reset.
This button's LED is illuminated when you are in Global Mode.
3-10
CAUTION: Performing a Hard Reset will erase ALL User Program and
User Multis, and will reset Global settings to a factory state.