Table of Contents
Advertisement
6.
If the Artis cannot detect a connection to the computer it will display the message
below.
7. If the connection was detected, you will be prompted with the above message. Copy the
KUF file to the virtual drive that appears on the PC and press OK.
8. Select the file from the list displayed on the next screen and Press OK.
You will see a progress bar indicating the progress. If update was successful you will see a
confirmation message. If there was a failure you will see a self-explanatory failure message
(with error code) to indicate the failure.
System Mode
System Update
10-7
Advertisement
Table of Contents
