Autopwr (Auto Power Off); Version; Hard Reset? (Restoring Factory Defaults) - Kurzweil Andante CUP 310 User Manual

AutoPwr (Auto Power Off)

"Auto Power Off" is an energy-saving feature that will automatically shut off power to the unit after a period of inactivity.
Five minutes before the instrument is automatically powered off, a warning will be shown which displays the time remaining
before power off. Pressing any button or key will reset the timer, and the instrument will not be powered off until it has been
inactive for the selected amount of time again. After the instrument is automatically powered off, simply pressing the power
button will power up the unit once again. This allows you to reduce overall power consumption, and also extends the lifetime
of the instrument.
The AutoPower parameter determines how long the instrument must be inactive before automatically powering off.
You can adjust the AutoPower parameter to the following settings: Off, 15 min, 30 min, 1 hour, 2 hours or 4 hours.
The selected AutoPower setting is remembered across power cycles. The default setting is 4 hours.

Version

The Version parameter allows you to view the currently installed operating system (OS) and object version numbers.
Press the RIGHT navigation button to view the Version sub menu where the version numbers can be viewed.
Press the LEFT navigation button or the EXIT button to return to the Settings Mode main menu.
Visit the Kurzweil website (www.kurzweil.com) to verify that your CUP310 has the latest versions.
These are located under the Downloads tab for the CUP310.
Complete installation instructions are included with the download. A standard USB cable will be required for this operation.

Hard Reset? (Restoring Factory Defaults)

This function resets the CUP310 to the original factory default settings.
All user settings are reset and the user recorded songs are erased. This action cannot be undone.
1. Use the UP and DOWN navigation buttons to select HardReset.
2. To perform the Hard Reset function press the RIGHT navigation button once.
3. The display now reads Confirm?
4. Press the RIGHT navigation button again to confirm and to reset the CUP310. The unit will then erase its user memory,
restore all factory settings and reboot.
If you want to cancel the Hard Reset and remain in Settings Mode, press the LEFT navigation button or the EXIT button to
return to Settings Mode. Press any other button to exit Settings Mode.
There is an alternate method for performing a Hard Reset:
1. Hold the highest key (C8) down while switching on the power.
2. Continue to hold C8 down until you see "RESETTING" in the display, then release the key.
Settings Mode
page 18