Sewing On Buttons - Pfaff Creative 1467A Instruction Book

When you cut open a buttonhole it is important
not to damage the bartacks. To avoid this, insert
the seam ripper about 1 mm away from the bar-
tack. Now carefully cut the buttonhole open to the
middle, then repeat this from the bartack at the
other end (Fig. 1). If you have no punch pliers to
cut the eyelet, simply cut around the curve with a
pair of pointed scissors.
prog
--
(
15
-
3-5
Feed dog:
Lowered
Lay the button on the mark made on the fabrk
beforehand and push the fabric with the buttor
under the sewing foot holder (Fig. 2). Turn th
hand wheel towards you and adjust the position ot
the button so that the needle stitches into its lef
hole. Lower the presser bar lifter Turn the hand
wheel and check to make sure the needle enterr
the right hole of the button. Then sew the button
on.
After backtacking, the needle stops in its upper
position.
Cutting buttonho les open Sewing on buttons