Free Motion Sewing
Insert the darning foot:
Loosen screw D. Set the needle at its
highest point and push the pin of the
darning foot fully into the hole C of the
sew ing foot holder. When doing this,
the guide fork G should position itself
around the presser bar. The lever E must
be behind the xing screw F. N ow tighten
screw D.
Free Motion Position:
Low er the presser foot lifter (A ) w hile
pushing it lightly to the rear. This snaps
the presser foot lifter into a notch (B) on
the back side of the sew ing machine into
the free motion position.
•
Drop the feed dog.
•
Select a straight stitch or a zigzag
stitch.
•
Keep an even speed, manually move
your fabric.
Tip: For even stitches, move your fabric at
a smooth even ow. M ove the fabric so the
stitching does not cross.
Sewing on buttons
With zigzag stitch G (stitch w idth 4
mm) you can sew on tw o and four hole
buttons.
•
Remove the sew ing foot and low er the
feed dog.
•
Turn the handw heel tow ards you and
move the button so that the needle
enters the left hole in the button.
•
N ow low er the presser foot lifter; this
holds the button in place.
36
D
C
Stitch
4.0
G
-
3.0
G
-
2.0
G
-
B
E
F
G
-
2-3
6
-
2-3
optio-
nal
-
–
2-3
A