Pfaff Creative 1467A Instruction Book page 135

Cording sewn
with gimp thread
00
____I— I
Needle:
130/705-H, size 80
prog
--
(J J
00 —5 +
corthng
Needle: Twin needle
Lift the needle plate off and pass the gimp thread
through round hole A. After that re-insert the
needle plate. Notch B' is the entry groove (Fig. 1).
Place the roll of gimp thread in front of the
machine (see Fig. 2).
Place the beginning of the gimp thread together
with the needle- and bottom threads back under
the cording foot. Move the detachable work sup
port up to the machine. Choose a gimp thread of
the same colour as the outer fabric.
Narrow pleats
E
prog
-a--fl
3—5 0
Iron the first fold line and stitch at the required
width. Prepare and stitch the further fold groups in
the same manner (Fig. 3),
For stitching down wider pleats we recommend
using the edge guide. Adjust the edge guide to the
required width. Guide the material so that the fold
runs along the edge guide. (See pages 60 and 73.)
3 3a
57