Pfaff Creative 1467A Instruction Book page 58

Fringe seams
Butterfly
Three worksteps are required for this:
First workstep (wings)
c_L_L_ 1
2—3
Fnngefrn
Stitch width: 1.5 mm
Stitch length: 0.5 mm
Fringe foot:
(special accessory)
First workstep (wings)
First sew a fringe seam as a trial, using a pk
of scrap material. During sewing, try differ 'r
stitch lengths until you find the one most s
iS
able. The wings are best sewn in circi I
seams, working from the outside inwards.
Second workstep (body)
prog
T
JT
Pattern length:as required
Second workstep (body)
Sew the body as shown in the illustrat ir
(Fig. 1).
Third workstep
Finally sew the antennas with small zigzag s S
ches, adding the dots at their tips by sewinc,,
program 43 stitch pattern (Fig. 1), using
• stitch width 4.0 mm
• pattern length 5.0
Flower
pro
10 43 44 —3+ 2
Mark out the pattern of the flower on the fabri:.
Sew the petals, stem and leaves as shown in tt
illustration. Now fill in the seed capsule using t
S
fringe foot, working spirally from the outsic
inwards (Fig. 2).
2