Inserting Lace; Attachin G Lace - Pfaff Creative 1467A Instruction Book

Inserting lace
L
prog
The lace insert is first secured to the face side of
the material and is sewn on at a narrow margin
with straight stitch.
The material underneath the lace is cut open at
the middle and ironed to the sides.
Second workstep
prog
1i
10
-3 + 0
1
prog
10
-3+ 0
-a--
prog
--
[]
00
--
j
-3+ 0
a
Stitch length: 3.0 mm
Baste and sew the lace onto the face side of the
material (Fig. 3).
Secure the corners with stitches.
For this work, two worksteps are required
First workstep
...,
-',I
\*
4•
.%'
I
.
Stitch
width: as required
Stitch length: as required
Sew over the lace edge on both sides with small,
dense zigzag-stitches from the face side. Cut off
the remaining material on the reverse side (Fig. 1).
Attachin g lace
For this work, two worksteps are required
First workstep
2
Stitch width: 5.0 mm
Stitch length: 1.5 mm
Serge the raw edge with zigzag stitches (Fig. 2).
Second workstep