Pfaff Creative 1467A Instruction Book page 68

• Edge guide
Seams stitched on articles tilled with cotton
or some other soft padding have a very promi
effect, For this purpose, batting, foam plast
flannel is placed between the top ply and a
weight bottom ply (Fig. 3).
To keep the fabric plies and the padding in p
baste them together with rows of long bastinç
ches spread over the whole area.
Squares and diamonds can be sewn on 11
straight or on the bias of the material. On faL
with regular patterns stitch between the patt
or around them.
1
The spacing between seams can be set as r
p
red by adjusting the guide accordingly.
Trace the seam line for the first seam on the f&
n
or guide the quilting gauge along the straigh
fabric edge.
When you have completed the first seam rr r
the work sideways so that the quilting gauge
along the first seam or the traced seam line.'
each subsequent seam, guide the gauge fir
j'
along the preceding line of stitching (Fig. 1).
Quilting can also be done advantageously on
terned materials.
Preparation of the material is the same as des ni
ed above. Just sew around the contours and
have a very beautiful piece of embroidery (Fic?
During the operation the needle position n
not be changed.
2
Qutng
L zi
2L
3