Pfaff Creative 1467A Instruction Book page 95

2
,:
a..
aa
35
20r
* Cording foot (special accessory)
First mark the starting line for the shirred se
on the underside of the fabric. Insert the need
the seam beginning point and place an ela
thread around the needle. Insert the elu
thread in the groove of the sewing foot in
Lower the sewing foot and sew a numbei
seams at about foot width. Ensure that the ela
thread is not pierced during sewing and do
stretch it. Finally, pull the threads with your h
and determine the amount of gather yours
Knot the threads on the inside (see Fig. 1).
Instead of elastic thread it is also possible to•
heavy cotton thread (see Fig. 2).
Pull the fabric to the required width and stitch
threads down. This provides you with a fixed
St
ed edge.
• This work can be carried out with dual feed
sewing foot No. 0.
Shirring with
e'astic thread
prog
1618