Table of Contents
Advertisement
Sewing on buttons
—
No 64
With
Button sewing program 64 you can easily sew on two and
four-hole buttons.
•
Remove the presser foot and lower the feed dog. (Make sure
the IDT is disengaged.)
•
Mark the button position on your fabric. Place the button on
the marked fabric.
•
Turn the handwheel towards you and position the button so
the needle enters the left hole in the button.
•
Lower the presser foot lifter. The button will be held in place
by the shank of the foot. Turn the handwheel to make sure the
needle also enters the right hole of the button.
•
Continue sewing on the button. The machine will complete the
program for you.
Tip!
use
the optional Sew on Button
Foot
to
sew optimal buttons.
Sewing on buttons with shanks
—
No 64
•
Attach the presser foot.
•
Leave the feed dogs lowered. Place a toothpick between the
holes of the button and sew it on as described on the left.
•
Remove the toothpick and pull the button and fabric apart.
• Wrap the stem with sewing thread and knot it.
Tip!
use
the optional Sew on Button Foot to
sew
optimal buttons with shanks.
Eye'ets
—
No 71
To stitch eyelets on a belt or linen items, select stitch 71,
68
Hide quick links:
Advertisement
Table of Contents
