Table of Contents
Advertisement
D
C
Stitch
4.2
G
-
3.2
G
-
2.2
G
-
B
E
F
G
-
2-3
6
-
2-3
optio-
nal
-
–
2-3
A
Free Motion Sewing
Insert the darning foot:
Loosen screw D. Set the needle at its
highest point and push the pin of the
darning foot fully into the hole C of the
sewing foot holder. When doing this,
the guide fork G should position itself
around the presser bar. The lever E must
be behind the fixing screw F. Now tighten
screw D.
Free Motion Position:
Lower the presser foot lifter (A) while
pushing it lightly to the rear. This snaps
the presser foot lifter into a notch (B) on
the back side of the sewing machine into
the free motion position.
• Drop the feed dog.
• Select a straight stitch or a zigzag
stitch.
• Keep an even speed, manually move
your fabric.
Tip: For even stitches, move your fabric at
a smooth even flow. Move the fabric so the
stitching does not cross.
Sewing on buttons
With zigzag stitch G (stitch width 4
mm) you can sew on two and four hole
buttons.
• Remove the sewing foot and lower the
feed dog.
• Turn the handwheel towards you and
move the button so that the needle
enters the left hole in the button.
• Now lower the presser foot lifter; this
holds the button in place.
35
Hide quick links:
Advertisement
Table of Contents
