Pfaff Creative 1467A Instruction Book page 184

prog
--
14
--
-3+
Sewing thread: Embroidery and darning thread
Key: press "sew slow"
Eyelet buttonholes are often sewn in outerwear,
such as jackets, coats or leisure wear. They
should always be sewn with backing material
underneath. However, a piece of paper should
also be placed underneath during sewing.
The buttonhole must be 3mm longer than the dia
meter of the button, plus its height. The distance
from the front should be equal to the buttonhole
width.
First mark the spacings and the distance from the
edge. Mark the buttonhole length from this point
to the inside. Then always sew from the inside
towards the edge.
Nine button-hole lengths are stored in the com
puter:
16, 18, 20, 22, 24, 26, 28, 30, 32 mm.
Upon program selection, a zigzag stitch width of
6mm appears in the display. Select the required
length for the buttonhole with stitch length key
125. The machine sews the selected buttonhole
automatically.
Correction of a buttonhole
If a buttonhole does not turn out correctly, It can
be cancelled by selecting another program.
Select the buttonhole again.
With the balance key (124) the left seam can be
adjusted to the right one.
Example:
If the left seam is too short, Fig. 1:
Using balance key, select + 1 to
+
3 or more, t
required.
If the left seam Is too long, Fig. 2:
Using balance key, select
—
1 to
—
2 or more, f
required.
Eyelet buttonholes
Adapting buttonhole seams
with the balance key
=
A
1 2
105