Pfaff Creative 1467A Instruction Book page 10

thread.
Important: It is not possible to wind
the bobbin when the MEM memory is
selected and when it is empty. Before
winding is begun, a program between
00 and 50 must be selected.
When winding from a thread spool
with thread slot, the slot must point to
the right of the spool holder.
Engaging the sewing mechanism:
Hold the wheel firmly, turn disc 103
towards the back, then turn the hand
forward until it snaps in.
prøg
e
Winding from a second spool:
Switch on master switch.
Swing bobbin winder thread guide 136
forward. Pull the thread through guide
133, then into bobbin winder tension A
and around guide lug B. Lead the
thread to winder 121 and wind a few
turns on the bobbin clockwise. Push
the bobbin to the right. Press down the
foot control and wind the bobbin. Push
the full bobbin to the left, remove
it
from the winder spindle, and cut the
6