Table of Contents
Advertisement
Manual transmission remote start
If the vehicle has manual transmission the proper steps must be followed before
leaving the parked vehicle or the remote start feature is disabled.
1.
Make sure the doors on the vehicle are closed.
2.
Put the transmission in neutral.
3.
Press on the brake in the vehicle.
4.
Apply the emergency brake.
5.
Release the brake.
6.
Within 15 seconds activate the remote start from the remote.
7.
The parking lights will flash confirming that the remote start is active.
8.
Turn off the ignition (the car should stay running when key is turned
off).
9.
Exit the vehicle.
10.
Arm the alarm (the vehicle should shut off when arming the system).
You can now remote start the vehicle. If a door is opened or if the alarm is trig-
gered before the next remote start activation the system will not remote start.
Note: To enable Valet take-over with a manual transmission, open the door and
enter into manual transmission mode, as described above. Once you exit the
vehicle you can arm the alarm and the car will stay running. If the vehicle shuts
down when arming, then the unit did not enter valet take-over mode.
© 2008 Directed Electronics—all rights reserved
Hide quick links:
Advertisement
Table of Contents
