Table of Contents
Advertisement
Long term event history
The system stores the last two full triggers in memory. These are not erasable.
Each time the unit sees a full trigger, the older of the two triggers in memory will
be replaced by the new trigger. To access long term event history:
Note: The Warn Away triggers are not stored to memory and will not be re-
ported.
0
1. With the ignition off, press and hold the Valet/Program
switch.
2. Turn on the ignition.
3. Release the Valet/Program switch.
4. Press and release the Valet/Program switch within 5
seconds. The LED will flash in groups indicating the last
two zones that triggered the unit for one minute or until
the ignition is turned off. Refer to table of zones.
© 2008 Directed Electronics—all rights reserved
Hide quick links:
Advertisement
Table of Contents
