Plug-In Led And Valet/Program Switch; Programmer Interface, 3-Pin Black Plug - Clifford Responder LE 3.3X Installation Manual

Responder le security and remote start

Hide thumbs Also See for Responder LE 3.3X:

Table of Contents

Plug-in LED and valet/program switch

The LED and valet switch are incorporated into the control center the LED line

will plug into the white 2-pin port and the Valet switch line will plug into the

blue 2-pin port.

Note: Onboard LED and valet switch can be substituted with an optional out-

board LED (P/N 8634 for Blue LED and 8633 for red LED) and an outboard valet

switch (P/N 8631).

Programmer interface - 3-pin black plug

The black 3-pin port is provided for programming the unit using the Bitwriter (p/

n 998T). When using the Bitwriter, it is possible to configure any and all of the

programmable functions as well as lock the Remote Control and System Features

Learn Routines so that unauthorized users cannot change the configuration or

program remote controls to the unit.

When the learn routines have previously been programmed using the

Bitwriter, they may have been locked. Before proceeding with repro-

gramming the learn routines, they must be unlocked with the Bitwriter

- this cannot be done manually with the Valet switch.

Note: Bitwriters require software v2.5. Bitwriters with date code of 6C or older

require an IC upgrade (p/n 998M). Bitwriter 2 compatible.

Table of Contents

Show Quick Links

Table of Contents