Door Lock Harness, 3-Pin Connector; Heavy Gauge Remote Start, (H3) 10-Pin Connector; Remote Start Input, 5-Pin Connector - Clifford Responder LE 3.3X Installation Manual

Door lock harness, 3-pin connector

1 BLUE
2 EMPTY
3 GREEN
There are three harness connections relative to remote start function, including
the heavy gauge and input and output harnesses.
Heavy gauge remote start, (H3)
10-pin connector
1 PINK
2 RED/WHITE
3 ORANGE
4 VIOLET
5 GREEN
6 RED
7 PINK/WHITE
8
PINK/BLACK
9 RED/BLACK
10 N/C

Remote start input, 5-pin connector

1
BLACK/WHITE
2 VIOLET/WHITE
3 BROWN
4 GRAY
5 BLUE/WHITE
22
(+) LOCK (-) UNLOCK OUTPUT
NOT USED
(-) LOCK (+) UNLOCK OUTPUT
(+) IGNITION 1 INPUT/OUTPUT
(30A) FUSED IGNITION 2 / FLEX RELAY INPUT 87
ACCESSORY OUTPUT
(+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL WIRE)
(+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)
(+) FUSED (30A) IGNITION 1 INPUT
(+) IGNITION 2 / FLEX RELAY OUTPUT
FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY
FUSED (30A) ACCESSORY/STARTER INPUT
N/C
(-) NEUTRAL SAFETY SWITCH INPUT
TACHOMETER INPUT WIRE
(+) BRAKE SHUTDOWN WIRE
N/O or N/C (-) HOOD PIN SWITCH INPUT, ZONE 6
(-) 200 mA 2ND STATUS/REAR DEFOGGER
© 2008 Directed Electronics—all rights reserved