Cutter Installation Method 2 (No Nose Unit) - Roland EGX-600 User Manual

3-3. Cutter Installation Method 2 (No Nose Unit)

This is for when you perform engraving without using the nose unit. The tool used is a character cutter or a flat cutter.
This method does not scrape the workpiece, so it is suitable for aluminum, brass and other materials that are easily
scratched. Note, however, that in order to obtain a uniform cutting-in depth, the thickness of the workpiece must also be
uniform.
Lock nut : Tighten
[AUTO Z CONTROL] : OFF
[REVOLUTION] : ON
Chapter 3 - Preparations
42
Lock nut
Character cutter or flat cutter
Cutter holder
(included with a character cutter or flat cutter)
Tool securing
screw