Forced Stop of Spindle Rotation
With this machine, you can set whether or not the spindle rotates. When it is set to rotate, rotation automatically starts
when a command is received from the computer and stops when cutting ends. When set not to rotate, no rotation at all
takes place. (Rotation does not occur even if you press
You use this feature at times such as when you are performing scribing using a diamond scraper.
Making the Setting for Spindle Rotation
1
Press
until the screen shown at right
appears.
2
Press
.
The blinking cursor moves to [OTHERS].
3
Press
.
The screen for setting spindle rotation appears.
4
Use
[ON] or [OFF]. Press
[ON] makes the setting for rotation, and [OFF] makes
the setting for forced stop.
to move the blinking cursor to
.
2-4. Starting and Stopping Spindle Rotation
.)
I/O
OTHERS
TEACHING SELF
I/O
OTHERS
TEACHING SELF
REVOLUTION
<ON>
Chapter 2 - Basic Operation
OFF
29