Making The Settings On The Machine - Roland EGX-600 User Manual

4-2. Setting the Cutting Parameters

Making the Settings on the Machine

Spindle Rotating Speed
Setting the Spindle Rotating Speed
1
Press
shown at right.
2
Use
press
You can also change the spindle speed while at the top screen, by turning the dial. Note, how-
ever, that when the machine is turned off, the spindle speed returns to the value you set using the
procedure described above.
Feed Rate
Setting the Feed Rate
1
Press
shown at right.
2
Press
to [XY-SPEED] or [Z-SPEED].
[XY-SPEED] sets the X- and Y-axis feed rate, and [Z-
SPEED] sets the Z-axis feed rate.
3
Use
.
You can change the feed rate while cutting is in progress. Follow the steps below to make the change.
(1) While cutting is in progress, press
(2) Press
(3) Press
Chapter 4 - Performing Cutting Using a Computer
60
several times to display the screen
to set the spindle speed, then
.
several times to display the screen
to move the blinking cursor
to set the feed rate, then press
. Cutting pauses.
. The screen shown in step 2 described above appears. Make the appropriate setting.
, then press . Cutting resumes at the new feed rate.
SPINDLE RPM
< 8000RPM >
XY-SPEED Z-SPEED
< 2mms > < 2mms >