Moving The Spindle Head Out Of The Way Quickly - Roland EGX-600 User Manual

Moving the Spindle Head Out of the Way Quickly

This feature moves the spindle head directly to the back-left position of the table (the VIEW position). This is handy
when loading or detaching a workpiece.
Moving to the VIEW Position
1
Press until the screen shown at right ap-
pears.
2
Press .
The blinking cursor moves to [VIEW].
3
Press .
The spindle head rises to the highest point, then moves
to the VIEW position.
2-3. Moving the Spindle Head
HOME VIEW
Z1 Z0 Z2
HOME VIEW
Z1 Z0 Z2
Chapter 2 - Basic Operation
27