Starting And Stopping Spindle Rotation; Using Buttons To Start And Stop Rotation; Adjusting The Spindle Rotating Speed - Roland EGX-600 User Manual

2-4. Starting and Stopping Spindle Rotation

Using Buttons to Start and Stop Rotation

Holding down
When the spindle cover is open, the spindle does not rotate.

Adjusting the Spindle Rotating Speed

To adjust the spindle rotating speed, you use the dial on the operation panel. The top screen displays the spindle rotating
speed.
Avoid turning the dial while cutting is in progress. The feed rate drops
momentarily, and the finished results of engraving may be adversely
affected.
Chapter 2 - Basic Operation
28
for 0.5 seconds or longer makes the spindle rotate. Pressing it again stops rotation.
Slow
Spindle rotating speed
Fast