Step 2: Attaching The Printer Unit And The Stand - Roland TrueVIS LG-640 Setup Manual

1. Assembly and Ink Filling

Step 2: Attaching the Printer Unit and the Stand

Procedure
1.
With six or more workers, lift up the printer unit.
CAUTION
Unpacking and installation must be carried out by 6 persons or more.
Failure to observe this instruction may cause the machine to fall over, resulting in injury.
2.
Move the stand under the printer unit.
The stand must be moved by a worker other than those indicated in step 1.
3.
Align the printer unit and the stand.
IMPORTANT
Aligning the printer to the front, back, left, and right according to the following procedure inserts the protru-
sions (A) on the tabletop plate of the stand into the slits (B) on the printer unit.
After aligning these items, place the printer unit on the stand.
(1)
Align the left and right sides.
16
Installation
B
A