Emergency Stop To Ensure Safety; How To Perform An Emergency Stop; To Cancel An Emergency Stop; Opening And Closing The Spindle Cover - Roland EGX-600 User Manual

2-1. Emergency Stop to Ensure Safety

How to Perform an Emergency Stop

To stop the machine in an emergency in order to avoid danger, press the emergency stop switch. The machine immedi-
ately stops operating and quits cutting. Cutting cannot be resumed.

To Cancel an Emergency Stop

To cancel an emergency stop, turn the emergency stop switch in the direction of the arrow. The machine returns to the
state it was in immediately after powerup.

Opening and Closing the Spindle Cover

Be sure to close the spindle cover before you start cutting, and never open it while operation is in progress. For safety,
opening the spindle cover during operation causes an emergency stop. To recover, switch off the power to the machine.
When the spindle cover is open, only head movement using the movement buttons is possible. You cannot use the buttons
to rotate the spindle or perform cutting.
Chapter 2 - Basic Operation
24