Points To Follow To Ensure Safe Use - Roland EU-1000MF Manual

1. Safety Information for This Machine

Points to Follow to Ensure Safe Use

This section explains safety precautions that should always be followed when using this machine.
Environments where the machine can be used
This section explains safety precautions about environments where the machine can be used.
• Do not use the machine in an environment containing hazardous materials. This machine is not explosion-
proof. Doing so could result in an explosion etc.
• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these items in
the vicinity of this machine. Doing so could result in fire or electric shock.
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water
or any other liquids, on or close to the machine. Fire or electric shock could result if water or metal objects
fall inside the machine.
• Make sure that the room where you are using the machine is well ventilated. Otherwise a fire or an electric
shock might occur. Be sure to install a ventilator when installing the machine in a sealed room or a room
with poor ventilation.
• Make sure to store ink bottles in a cool and dry place.
• Avoid mixing ink with incompatible materials.
• Keep the machine in an environment free from humidity and dust. Otherwise a fire or an electric shock
might occur.
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.
• Be sure to adjust the level foot to keep the machine flat. Using the machine on an unstable surface might
cause an injury or unexpected accident.
Handling power cords and power cord plugs
This section explains safety precautions about handling power cords and power cord plugs.
• Only qualified electricians are allowed to handle electrical work. This machine contains parts that generate
high voltages. Failure to observe this caution might result in an electric shock.
• Do not touch energized parts when opening covers. Touching them might result in electric shock.
• Do not use any power sources other than those that match the specifications shown. Doing so could result
in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could result in
fire or electric shock.
10