BMW M5 Owner's Handbook Manual page 60

Resetting values
You can reset the values for average speed and
average fuel consumption:
1. Select the respective menu item and press
the controller.
2. Press the controller again to confirm your
selection.
Entering distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to set the distance to the
destination. You may need to overcome a
slight resistance if you wish to enter a rela-
tively high difference.
3. Press the controller to adopt the setting.
The distance is automatically preset during
route guidance by the navigation system
Journey computer
The journey computer is suitable e.g. for a holi-
day trip.
1. Call up start menu.
2. Call up "Navigation".
On cars without navigation system
"OBC".
3. Select "On-board Info" and press the con-
troller.
Online Edition for Part-No. 01 41 0 159 168 © 03/05 BMW AG
4. Select "Journey computer" and press the
controller.
> Departure time
>
Journey time
> Distance covered
> Average speed
> Average fuel consumption
To start or stop the journey computer or reset
all values in the journey computer:
1. Select "Set" and press the controller.
2. Select the desired menu item.
3. Press controller.
Display options
You can have the computer or the journey com-
puter displayed in the assistance window.
*
.
1. Move the controller to the right to switch to
the assistance window and press the
controller.
*
: call up
2. "Computer" or "Journey computer"
59