Cradlepoint IBR600 Product Manual page 43

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
Local Networks: "Detailed Info" links to Network Settings → WiFi / Local Networks.
• Clients: The number of current clients.
For each network, the following information is displayed:
• Network Name: IP Address/Netmask
o IPv6 Address: Shows the address if IPv6 is enabled.
o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled.
o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.
To configure a network, see Network Settings → WiFi / Local Networks.
WiFi Networks: "Detailed Info" links to Network Settings → WiFi / Local Networks.
• WiFi Radio: Channel: 1-11. Transmit Power (Expressed as a percentage).
• Channel Contention: Displayed as a bar graph by percentage. Lower numbers are better; lower numbers mean
that there are few competing signals.
For each WiFi network, the following information is displayed:
• SSID:
Service Set Identifier—an identifier or name for a wireless network.
o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients
o Network: The name of the local network.
To configure WiFi network settings see Network Settings → WiFi / Local Networks.
5.3.1 Router Alerts
On the right side of the Dashboard page is a brief set of "Router Alerts" that state basic
information such as whether the router is running properly. This will inform you about the
availability of new firmware, for example.
Router Alerts includes links to the System Software page (for new firmware) and the
Connection Manager.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 40