Cradlepoint IBR600 Product Manual page 172

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
uploaded to the router. Enable Certificate Support in the Global VPN Settings to upload a single set of certificates for the
router to use.
Pre-shared Key: Create a password or key. The routers on both sides of the tunnel must use this same key.
Mode: Tunnel or Transport. Tunnel Mode is used for protecting traffic between different networks, when traffic must
pass through an intermediate, untrusted network. Transport Mode is used for end-to-end communications (for example,
for communications between a client and a server).
Initiation Mode: "Always On" or "On Demand." "Always On" is used if you want the tunnel to initiate the tunnel
connection whenever the WAN becomes available. On Demand is used if you want the tunnel to initiate a connection if
and only if there is data traffic bound for the remote side of the tunnel.
Tunnel Enabled: Enabled or Disabled.
MBR1200 Quick Connect: VPN tunnels in the IBR600/IBR650 have more choices than they do in the MBR1200, so it is
more complex to configure. Check this box to simplify setup by streamlining your options.
WAN Binding: WAN Binding is an advanced optional parameter used to configure a VPN tunnel to ONLY operate when
the specified WAN device(s) are available and connected. An example use case is a router with both a primary and
backup WAN connection and the VPN tunnel should only be used when the system has failed over to the backup
connection. This use case makes the most sense when the primary and backup connections are mutually exclusive, i.e.,
not connected at the same time.
You have several options for specifying the type of WAN interface(s) you want associated with VPN Tunnels. Designate
the interface(s) by Port, Manufacturer, Model, Type, Serial Number, MAC Address, or Unique ID. This selection will
create a dropdown list of options to complete a sentence with the following form: "When ____ is ____," such as, "When
TYPE is LTE." You also have the option to replace "is" with "isn't," "starts with," "ends with," or "contains."
• Port: Select from the dropdown list of possible WAN ports on the router.
o WAN Ethernet
o LAN Ethernet 1
o undefined
• Manufacturer: Select from a dropdown list of attached devices.
• Model: Select from a dropdown list of attached devices.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 169