Cradlepoint COR IBR600 Quick Start Manual

COR IBR600 ( Integrated Broadband Router )

QUICK START GUIDE

SETTING UP THE ROUTER
Plug the power supply into an electrical outlet.
1 )
2 ) Connect WiFi (2.4) and Modem ( ) Antennas (finger tight only).
Connect the power supply to the IBR600.
3 )
Ensure power is switched on. o = OFF | = ON
dual-stream n
What's In The Box
Integrated Broadband Router Mounting Bracket AC Power Supply Quick Start Guide
www.cradlepoint.com
for more information about your product, visit:
PORTS & SWITCHES
ETHERNET CONNECTIONS
WiFi
WiFi
ANTENNA COMPUTERS ETHERNET ANTENNA
MICRO
or LOCAL DEVICES DATA SOURCE
CONNECTOR POWER
CONNECTOR
USB
( LAN ) ( WAN )
12VDC
default default
RESET
WiFi ANTENNAS
Finger Tight Only
POWER MODEM
LED
LED
MODEM MODEM
POWER SIGNAL
ANTENNA WiFI
ANTENNA
ON/OFF STRENGTH
CONNECTOR LED
CONNECTOR
LEDS
MODEM ANTENNAS
Finger Tight Only
SIM SLOT
(SIM-BASED VERSIONS ONLY)
FINDING YOUR PASSWORD
Your unique default password is shown on the product label on the bottom
of your router. It is also the last eight characters of the MAC Address.
You will be asked for this password when you log into the administration pages.
The default password provides security for your router out-of-the-box.
Default SSID: IBR600-xxx (last 3 characters of the MAC Address)
SPECIAL FEATURES
IPSec VPN End-Point Support
GRE Tunneling
Data Usage Management & Alerts
(2.4)
GPIO Interface
GPS (if supported by modem carrier)
Failover / Failback
WiFi Hotspot Services
(Captive Portal/Walled Garden)
IP Passthrough
WiFi as WAN & Dual SSIDs
VLAN Support
find this label on the bottom of your router
WiPipe Central Remote Management
TM
USB to Serial Console Passthrough Support
LAN/WAN Affinity
( )
www.cradlepoint.com/IBR600
2 To learn more about features, visit:
ACTIVATE YOUR MODEM
A wireless broadband data plan must be added to your IBR600s. Wireless broadband data plans are
made available from wireless carriers, such as Sprint, Verizon, and Clearwire and are required to allow
your modem to connect and transfer data on their network. Mobile broadband, M2M and Router pricing
plans are available. To add or transfer a line of service you will need to provide unique identifiers such as
ESN for 3G EVDO modems, MAC address for WiMAX modems, or IMEI for LTE modems.
provisioning for LTE models is done the same way as for USB modems. Once provisioned insert the SIM
into the router until it clicks into place, close the SIM door and turn on the power switch. After adding a
data plan to the Verizon 3G EVDO model the modem may need to be activated. Login to the IBR600
administration pages (see below) and select Internet from the top navigation bar then Connection
Manager from the drop-down menu, find and select the CradlePoint "EVDO Modem" and click Control
modem and click Activate. When modem activation is complete, confirm the modem LED is solid green
on the router.
For more information on activation see www.cradlepoint.com/activation.
USING THE FIRST TIME SETUP WIZARD
The First Time Setup Wizard will help you customize the name of your wireless network, change passwords
to something you choose, and establish an optimal WiFi security mode. The IBR600 comes with a unique
password creating built-in WiFi Security, which prevents unauthorized users from connecting to your WiFi network.
1) Open a browser window and type "cp/" or "192.168.0.1" in the address bar. PRESS ENTER/RETURN.
2) When prompted for your password, type the eight character Default Password found on product label
(the last eight characters of the MAC Address).
3) When you log-in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD.
4) Follow the steps to establish a customized wireless network name, password, and security level.
If you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network
using the newly established wireless network name and wireless security password.
3
SIM
4