Cradlepoint IBR600 Product Manual page 174

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
Page 2-3: Local and Remote
7.9.2
Networks
Local Network: The Network Address and
the Netmask define what local devices
have access to or can be accessed from the
VPN tunnel. The router will automatically fill
in the values for your network, but you can
change the values to limit the tunnel to only
some of the devices in your network.
NOTE: The local network IP address must be
different from the remote network IP address.
Remote Network: Enter the remote
Gateway's IP address or fully qualified
domain name (my.domain.com). It is
recommended you use a dynamic DNS host
name instead of the static IP address. By
using the dynamic DNS host name updates of the remote WAN IP are compensated for while connecting to a VPN tunnel.
Enter the Network IP address with the Subnet Mask to define the remote network subnet that the local devices will have
access to.
NOTE: The remote network IP address must be different from the local network IP address.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 171