Device - Cradlepoint IBR600 Product Manual

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
3.2 Connect to a Computer or other Device
For the IBR650, simply connect your device(s) to the
router via Ethernet.
3.2.1 Wireless Network Connection (IBR600)
1) Find the network. On a WiFi-enabled computer or
device, open the window or dropdown menu that
allows you to access wireless networks. The IBR600
network will appear on the list: select this network.
2) Log in. You will need to input the Default
Password when prompted. The Default Password is provided on the product label found on the bottom of your router
(this password is the last eight digits of the router's MAC address, which can be found on the product box or on the
product label).
© 2013 CRADLEPOINT, INC.
NOTE: If more than one IBR600 wireless router is visible, you can find the correct unit by
checking for its SSID (service set identifier; the unique name of the local network). The
default SSID of the primary network has the form IBR600-xxx, where "xxx" is the last 3
digits of the router's MAC address.
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 17