Cradlepoint IBR600 Product Manual page 13

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
Ethernet Ports: By default, the IBR600/IBR650 has one WAN (Wide Area Network—your Internet source) port and one
LAN (Local Area Network) port. Each of these ports can be reconfigured, however, if you need two LAN or two WAN
Ethernet ports.
Ethernet LED:
• Solid Green – connected
• Blinking Green – data transfer activity
USB Port (Standard-A): This port can be used for an external USB modem or to attach a direct firmware upgrade to
enable manual firmware upgrades if necessary. (Hardware version 1.3 changed from a micro USB port to a full-size
Standard-A USB port.)
WiFi Antennas (IBR600 only): The IBR600 comes with two 2.4 GHz WiFi antennas (Reverse SMA). These antennas are
simple to attach and adjust for maximum WiFi broadcast.
The antenna position shown is not allowed: neither WiFi nor modem antennas
should lie on top of each other.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 10