Cradlepoint IBR600 Product Manual page 104

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
IPv6 Addressing:
Address Configuration Mode:
SLAAC Only – SLAAC
autoconfiguration. The router regularly generates a
router advertisement that includes network prefix and
routing information, allowing clients to autogenerate an
address and start communicating on the network. Clients
utilize neighbor discovery protocols to ensure multiple
clients on the subnet have not chosen an identical
address.
SLAAC with DHCP – (Default) IPv6 DHCP provides an
additional client configuration method and is regularly
combined with SLAAC to provide DNS servers (a
shortcoming in the original SLAAC specification) and
additional options not supported by SLAAC. By
defaulting to SLAAC with DHCPv6, all IPv6-capable
clients on the network should be configurable with IPv6
connectivity.
• DHCP Range Start: The beginning of the range that will be used for IPV6 DHCP addresses. The IPv6 range will
always start at 1.
• DHCP Range End: The ending IP address in the DHCP Server range is the end of the reserved pool of IP
addresses that will be given to any DHCP-enabled computers on your network.
• IPv6 DHCP Lease Time: This specifies how long DHCP-enabled computers will wait before requesting a new
DHCP lease.
Disable SLAAC and DHCP – Disable both IPv6 address configuration modes.
© 2013 CRADLEPOINT, INC.
stands for stateless address
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 101