Cradlepoint IBR600 Product Manual page 22

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
3.2.3 Connect to the Internet (IBR600)
If you used the First Time Setup Wizard, you might
have changed the "WiFi Network Name" or the
"Security Mode" password. If so, you will need to
reconnect your device(s) to the IBR600 network.
• Find the network. Look for your new
personalized network name (or the default
SSID of the form "IBR600-xxx").
• Log in using your new personalized WiFi
security password (or the Default Password
found the bottom of the router).
Your network should now be up and running, and
users who have the security password can access the
network on WiFi-enabled devices.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 19