Cradlepoint IBR600 Product Manual page 199

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
• Enable GPS server on LAN: Enables a server on the LAN side of the firewall that will periodically send GPS
NMEA sentences to TCP connected clients. It also responds to incoming UDP datagrams.
o GPS server port number
• Enable GPS reporting to remote server: Enables periodic reporting of GPS NMEA sentences to a remote server.
The router will buffer NMEA data if errors are encountered or if the Internet connection goes down and send the
buffered sentences when the connection is restored.
o Remote server hostname or IP
o Remote server port
o UDP remote server: Using UDP instead of TCP reduces the load on the router and may save bandwidth.
However UDP does not provide any guarantee for delivery. The router will typically assume sentences have
been received by the remote UDP server and will not buffer those sentences.
o Report only over specific time interval: Restricts the NMEA sentence reporting to a remote server to a
specific time interval.
Depending on your selections (and other possible factors), reporting may include proprietary sentences. For example, if
you select Include System ID, the report will include proprietary sentences of the following format (in addition to the
standard sentences):
$PCPTI,{System ID},{router timestamp},{GGA timestamp},{GGA checksum}*{checksum}
"PCPTI" stands for Proprietary, CradlePoinT, Identification (P-CPT-I).
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 196