Cradlepoint IBR600 Product Manual page 29

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the
router's WiFi broadcast once the security settings have been saved.
• WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and
lower case letters along with numbers and special characters is recommended to prevent hackers from gaining
access to your network.
• WEP Key: A WEP Key must be either a hexadecimal value of 5 or 13 characters or a text value of 10 or 26
characters.
Click NEXT.
7) Configuring Your Access Point Name (APN):
If you are using a SIM-based modem
(LTE/GSM/HSPA) with your CradlePoint router you
may need to configure the APN before it will properly
connect to your carrier. Wireless carriers offer
several APNs, so check with your carrier to confirm
the appropriate one to use. Some examples include:
• AT&T: "broadband"
• T-Mobile: "epc.tmobile.com"
• Rogers LTE: "lteinternet.apn"
• Bell: "inet.bell.ca"
• TELUS: "isp.telus.com"
You can either leave this on the Default setting or
select Manual and input a specific APN.
If your specific modem or SIM already has APNs programmed into it, you should leave this on the Default setting.
After finishing this Wizard go to Internet → Connection Manager, select your modem, and edit the settings. The SIM
PIN/APN tab has more available settings than are provided here.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 26