Cradlepoint IBR600 Product Manual page 195

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
8.1.2 System Clock
Enabling NTP will tell the router to get its
system time from a remote server on the
Internet. If you do not enable NTP then the
router time will be based on when the router
firmware was built, which is guaranteed to be
wrong. Whenever the Internet connection is re-
established and once a week thereafter the
router will ask the server for the current time so
it can correct itself.
You then have the option of selecting an NTP
server and adjusting the NTP server port. Select the NTP server from the dropdown list. Any of the given NTP servers will
be sufficient unless, for example, you need to synchronize your router's time with other devices in a network.
Time Zone: Select from a dropdown list. Setting your Time Zone is required to properly show time in your router log.
Daylight Savings Time: Select this checkbox if your location observes daylight savings time.
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 192