Cradlepoint IBR600 Quick Start Manual

IBR600 (Integrated Broadband Router)

QUICK START GUIDE

SETTING UP THE ROUTER
1 ) Plug the power supply into an electrical outlet.
2 ) Connect WiFi (2.4) and Modem ( )Antennas
3 )
Connect the power supply to the IBR600.
Ensure power is switched on. o = OFF | = ON
dual-stream n
What's In The Box
Integrated Broadband Router Mounting Bracket AC Power Supply Quick Start Guide
www.cradlepoint.com
for more information about your product, visit:
PORTS & SWITCHES
ETHERNET CONNECTIONS
WiFi
WiFi
ANTENNA COMPUTERS ETHERNET
MICRO ANTENNA
or LOCAL DEVICES DATA SOURCE
CONNECTOR POWER CONNECTOR
USB
( LAN ) ( WAN )
12VDC
default default
RESET
WiFi ANTENNAS
POWER MODEM
LED LED
MODEM
MODEM
POWER SIGNAL
WiFI
ANTENNA ANTENNA
ON/OFF STRENGTH
CONNECTOR LED
CONNECTOR
LEDS
MODEM ANTENNAS
FINDING YOUR PASSWORD
Your unique default password is shown on the product label on the bottom
of your router. It is also the last eight characters of the MAC Address.
You will be asked for this password when you log into the administration pages.
The default password provides security for your router out-of-the-box.
Default SSID: IBR600-xxx (last 3 characters of the MAC Address)
SPECIAL FEATURES
IPSec VPN End-Point Support
Default Password: 440c1fc1
(2.4) GRE Tunneling
Data Usage Management & Alerts
GPIO Interface
GPS
(if supported by modem carrier)
Failover / Failback This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions (1) This device may not cause harmful interference and (2)This device must
accept any interference received, including interference that may cause undesired operation
WiFi Hotspot Services
(Captive Portal/Walled Garden)
MFG DATE: MAR 2011
IP Passthrough Made in Taiwan
WiFi as WAN
find this label on the bottom of your router
Dual SSIDs
VLAN Support
( ) www.cradlepoint.com/IBR600
To learn more about features, visit:
2
ACTIVATE YOUR MODEM
A wireless broadband data plan must be added to your IBR600. A new line of service can be added or
a data plan can be transferred from an existing account. Wireless broadband data plans are made
available from wireless carriers, such as Sprint and Verizon, and are required to allow your modem to
connect and transfer data on their network. You will need the ESN number from your product label on
your router to add or transfer a line of service. After adding a data plan to the modem, the modem may
need to be activated. To activate the modem, login to the IBR600 administration pages (see below) and
select Internet from the top navigation bar then Modem Settings from the drop-down menu, find and
select the CradlePoint modem and click Update/Activate, in the popup click Activate.
To add a broadband data plan, or to check if your modem has a broadband data plan attached, contact
the business you purchased the IBR600 from or your wireless service provider. For more information see
Model No.: IBR600
Part No.: IBR600 www.cradlepoint.com/IBR600.
H/W ver.: 1.0
www.cradlepoint.com
ESN (Hex): A1000010000557
USING THE FIRST TIME SETUP WIZARD
MAC Address : 0030440c1fc1
Serial No.: MM100167900418 The First Time Setup Wizard will help you customize the name of your wireless network, change passwords
to something you choose, and establish an optimal WiFi security mode. The IBR600 comes with a unique
password creating built-in WiFi Security, which prevents unauthorized users from connecting to your WiFi network.
1) Open a browser window and type "cp/" or "192.168.0.1" in the address bar. PRESS ENTER/RETURN.
dual-stream n
FCC ID:UXX-IBR600 2) When prompted for your password, type the eight character Default Password found on product label
Contains FCC ID: N7N-MC5728 RoHS
12V 1.5A
(the last eight characters of the MAC Address).
3) When you log-in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD.
4) Follow the steps to establish a customized wireless network name, password, and security level.
If you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network
using the newly established wireless network name and wireless security password.
3 4