Cradlepoint IBR650 Quick Start Manual

IBR650 (Integrated Broadband Router)

QUICK START GUIDE

SETTING UP THE ROUTER
Purchase a data plan. Then insert the SIM if model requires.
1 )
Plug the power supply into an electrical outlet.
2 )
Connect modem ( , , , , ) antennas (finger tight only).
3 )
Connect the power supply to the IBR650.
4 )
Ensure power is switched on. O = OFF I = ON
What's In The Box
Integrated Broadband Router AC Power Supply Quick Start Guide
Mounting Bracket
With Modem Antennas
www.cradlepoint.com
for more information about your product, visit:
PORTS & SWITCHES
ETHERNET CONNECTIONS
COMPUTERS MODEMS/
or LOCAL DEVICES DATA SOURCE
POWER USB
( LAN ) ( WAN )
(Standard-A)
12VDC
default default
RESET
MODEM
POWER
MAIN MODEM AUXILIARY MODEM
LED
LED
ANTENNA ANTENNA
POWER SIGNAL
ATTN
CONNECTOR CONNECTOR
ON/OFF LED STRENGTH
(SMA) (SMA)
LEDS
MODEM ANTENNAS
( ,
SIM SLOT
(SIM-BASED VERSIONS ONLY)
See Product Manual for suggested antenna positions.
ACCESSING THE ADMINISTRATION PAGES
To make configuration changes to your router, open the IBR650's
GUI-based administration pages.
1) Connect via Ethernet.
2) Open a browser window and type "cp/" or "192.168.0.1" in the
address bar. Press ENTER/RETURN.
3) When prompted for your password, type the eight character
DEFAULT PASSWORD found on the product label.
THE FIRST TIME SETUP WIZARD
When you log in for the first time, you are automatically directed to the FIRST TIME SETUP WIZARD, which
will help you customize your COR IBR650. Change any of the following:
Administrator password
Time zone
Access Point Name (APN) for SIM-based modems
WAN failure check mode
NOTE: To return to the First Time Setup Wizard after your initial login, select GETTING STARTED on the top navigation bar and
FIRST TIME SETUP in the dropdown menu.
To restore the COR IBR650 to its factory default settings, press and hold the RESET button on the side
RESET:
of the device for ten seconds. Reset returns the login password to the DEFAULT PASSWORD and resets all
configuration changes.
, , , )
Finger Tight Only
2
ACTIVATE YOUR MODEM
A wireless broadband data plan must be added to your IBR650. Wireless broadband data plans are
Model No.: IBR650
available from wireless carriers such as Sprint, Verizon, AT&T, EE, Vodafone, and Clearwire. Mobile
Part No.: IBR650
H/W ver.: 2.0
www.cradlepoint.com broadband, M2M and router pricing plans are available. To add or transfer a line of service you will need
Default Password: 440c1fc1 to provide a unique identifier such as ESN for 3G EVDO modems, MAC address for WiMAX modems, or
ESN (Hex): A1000010000557
IMEI/MEID for LTE or HSPA+ modems. LTE and HSPA+ plans require a SIM. SIM provisioning for LTE and
MAC Address : 0030440c1fc1 HSPA+ models is done the same way as for USB modems. Once provisioned insert the SIM into the
router until it clicks into place, close the SIM door, and turn on the power switch. After adding a data plan
Serial No.: MM100167900418
to the Verizon 3G EVDO model the modem may need to be activated. Log into the IBR650 administration
pages (see page 3) and select Internet from the top navigation bar and then Connection Manager
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions (1) This device may not cause harmful interference and (2)This device must
accept any interference received, including interference that may cause undesired operation
from the dropdown menu. Find and select the CradlePoint "EVDO Modem" and click Control and then
click Activate. When modem activation is complete, confirm the modem LED is solid green on the router.
MFG DATE: MAR 2011
Contains FCC ID: N7N-MC5728
RoHS
Made in Taiwan
12V 1.5A
For more information on activation see www.cradlepoint.com/activation.
Find this label on the bottom of your router.
The NM (no module) units do not have an integrated modem. An attached USB modem may require
activation.
SPECIAL FEATURES
IPSec VPN End-Point Support
GRE Tunneling
Data Usage Management & Alerts
GPIO Interface
GPS (if supported by modem carrier)
Failover/Failback
IP Passthrough
VLAN Support
USB to Serial Console Passthrough Support
LAN/WAN Affinity
BGP/OSPF/RIP
VRRP
www.cradlepoint.com/IBR650
To learn more about features, visit:
3
IP PASSTHROUGH
To quickly and easily configure IP Passthrough, select
GETTING STARTED in the top navigation menu and IP
PASSTHROUGH SETUP in the dropdown menu. The IP
Passthrough Setup Wizard will guide you through the setup
process.
For more IP Passthrough options, select NETWORK
SETTINGS in the top navigation menu and LOCAL
NETWORKS in the dropdown menu. Select the LAN you
would like to edit and set the Routing Mode to "IP
Passthrough".
4