Internet Access Wizard Setup: Fourth Screen - ZyXEL Communications Prestige 2602R Series User Manual

Table 9 Wizard Setup: Voice Configuration (continued)
LABEL
REGISTER Server Port Enter the SIP register server's listening port for SIP in this field.
SIP Service Domain
Authentication User ID
Authentication
Password
Send Caller ID
Back
Next

3.1.4 Internet Access Wizard Setup: Fourth Screen

Verify the settings in the screen shown next. To change the LAN information on the Prestige,
click Change LAN Configurations. Otherwise click Save Settings to save the configuration
and skip to the section 3.13.
Chapter 3 Wizard Setup
DESCRIPTION
Note: If you were not given a register server port, then enter the
port from the SIP Server Port field again here.
Enter the SIP service domain name in this field (the domain name that comes
after the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended
set characters.
This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up to
95 ASCII characters.
Type the password associated with the user name above. You can use up to
95 ASCII Extended set characters.
Select this check box to show identification information when you make VoIP
phone calls. Clear the check box to not show identification information when
you make VoIP phone calls.
Click Back to go back to the previous screen.
Click Next to continue to the next wizard screen.
Prestige 2602R Series User's Guide
63