General Nat Examples; Figure 152 Menu 15.2 Nat Server Setup; Figure 153 Multiple Servers Behind Nat Example - ZyXEL Communications Prestige 2602R Series User Manual

Prestige 2602R Series User's Guide

Figure 152 Menu 15.2 NAT Server Setup

Rule
---------------------------------------------------
10.
11.
12.
4 Enter a port number in an unused Start Port No field. To forward only one port, enter it
again in the End Port No field. To specify a range of ports, enter the last port to be
forwarded in the End Port No field.
5 Enter the inside IP address of the server in the IP Address field. In the following figure,
you have a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at
192.168.1.33.
6 Press [ENTER] at the "
configuration after you define all the servers or press [ESC] at any time to cancel.

Figure 153 Multiple Servers Behind NAT Example

28.5 General NAT Examples

The following are some examples of NAT configuration.
274
Menu 15.2 - NAT Server Setup
Start Port No.
1. Default
2. 21
3. 0
4. 0
5. 0
6. 0
7. 0
8. 0
9. 0
0
0
0
Press ENTER to Confirm or ESC to Cancel:
Press ENTER to confirm ...
End Port No. IP Address
Default 0.0.0.0
21 192.168.1.33
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
Chapter 28 Network Address Translation (NAT)
" prompt to save your