ZyXEL Communications Prestige 2602R Series User Manual page 55

Table 3 Web Configurator Screens Summary (continued)
LINK
UPnP
Logs
Media Bandwidth
Management
Maintenance
System Status
DHCP Table
Any IP Table
Diagnostic
Firmware
Chapter 2 Introducing the Web Configurator
SUB-LINK FUNCTION
Use this screen to enable UPnP on the Prestige.
Log Settings Use this screen to change your Prestige's log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Summary Use this screen to allocate an interface's outgoing capacity to
specific types of traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
This screen contains administrative and system-related
information.
This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
This screen lists the devices that are using the Any IP feature to
communicate with the Prestige.
General These screens display information to help you identify problems
with the Prestige general connection.
DSL Line These screens display information to help you identify problems
with the DSL line.
Use this screen to upload firmware to your Prestige or reset the
factory defaults to your Prestige.
Prestige 2602R Series User's Guide
55