Remote Node Filters; Figure 180 Filtering Ethernet Traffic; Figure 181 Filtering Remote Node Traffic - ZyXEL Communications Prestige 2602R Series User Manual

Prestige 2602R Series User's Guide

Figure 180 Filtering Ethernet Traffic

30.7.2 Remote Node Filters

Go to menu 11.5 (shown next) and type the number(s) of the filter set(s) as appropriate. You
can cascade up to four filter sets by typing their numbers separated by commas. The factory
default filter set,
in menu 11.5 to block local NetBIOS traffic from triggering calls to the ISP.

Figure 181 Filtering Remote Node Traffic

Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
298
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
, is inserted in the protocol filters field under Call Filter Sets
NetBIOS_WAN
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 6
device filters=
Output Filter Sets:
protocol filters= 2
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL:
Chapter 30 Filter Configuration