Figure 13 Internet Connection With Enet Encap; Table 7 Internet Connection With Enet Encap - ZyXEL Communications Prestige 2602R Series User Manual

Prestige 2602R Series User's Guide
Table 6 Internet Connection with RFC 1483 (continued)
LABEL
Back
Next

Figure 13 Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Table 7 Internet Connection with ENET ENCAP

LABEL
IP Address
Subnet Mask
ENET ENCAP
Gateway
Network
Address
Translation
Back
Next
60
DESCRIPTION
Click Back to go back to the first wizard screen.
Click Next to continue to the next wizard screen.
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Enter a subnet mask in dotted decimal notation.
Refer to the appendix on IP subnettig to calculate a subnet mask If you are
implementing subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
chapter for more details.
Click Back to go back to the first wizard screen.
Click Next to continue to the next wizard screen.
Chapter 3 Wizard Setup