The following figure shows your Prestige (A) connected to the Internet. 1 Hardware Connections You need the following before you start: Note: You may need your Internet access and voice account information. Prestige Computer Ethernet Cable Telephone Cable Prestige 2602R Series Quick Start Guide Telephone Power Adaptor...
LAN and DSL/PPP LEDs turn on if the LAN and DSL ports are properly connected (they flash when sending or receiving data). See your User's Guide for detailed LED descriptions. 2 Initial Configuration You may configure the Prestige for Internet access in any one of these ways: • Zero Configuration Prestige 2602R Series Quick Start Guide...
If you want to set up a SIP account for VoIP calls, you should also configure the voice configuration wizard screen (see Setup. Prestige 2602R Series Quick Start Guide ENCAPSULATION METHOD YOU ARE USING RFC1483 in bridged mode with a dynamic IP address or...
Page 5
3 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main web configurator screen. 4 In the Site Map screen, click Connection Setup. Prestige 2602R Series Quick Start Guide Section 3.1 on page 12...
D) If you select Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT. E) Click Next. Prestige 2602R Series Quick Start Guide...
Page 7
Max. Idle Timeout field. F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. G) Click Next. Prestige 2602R Series Quick Start Guide...
Page 8
(except if otherwise specified). Note: You should have a voice account already set up. This screen configures SIP account 1. Use the VoIP screens to configure SIP account 2. Prestige 2602R Series Quick Start Guide...
Page 9
LAN port. To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the main screen. Prestige 2602R Series Quick Start Guide...
Services not specified in bandwidth management are allocated bandwidth after all specified services receive their bandwidth requirements. If the rules set up in this wizard are changed in the advanced setup, then the service priority will be set to Others. B) Click Finish. Prestige 2602R Series Quick Start Guide...
Make sure that the power source is turned on. Check all cable the Prestige’s power. connections. If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact your local vendor. Prestige 2602R Series Quick Start Guide...
2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections. 3 Right-click Local Area Connection and then click Properties. 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. Prestige 2602R Series Quick Start Guide 12).
Page 13
1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. Prestige 2602R Series Quick Start Guide...