6.5.1 Ethernet Traffic
6.5.2 Ethernet Traffic
You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets,
reduce traffic and prevent security breaches. Go to menu 3.1 (shown next) and type the number(s) of the
filter set(s) that you want to apply as appropriate. You can choose up to four filter sets (from twelve) by
typing their numbers separated by commas, for example, 3, 4, 6, 11.
Press ENTER to Confirm or ESC to Cancel:
6.5.3 Remote Node Filters
Go to menu 11.5 (shown next) and type the number(s) of the filter set(s) as appropriate. You can cascade up
to four filter sets by type ing their numbers separated by commas.
Press ENTER to Confirm or ESC to Cancel:
Filter Set Configuration
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
device filters=
Output Filter Sets:
device filters=
Figure 6-8 Filtering Ethernet Traffic
Menu 11.5 – Remote Node Filter
Input Filter Sets:
device filters=
Output Filter Sets:
device filters=
Figure 6-9 Filtering Remote Node Traffic
P782M G.SHDSL Bridge
6-11